www.clare.com ds-CPC2017N-r01 1 CPC2017N 8-pin dual soic optomos ? relay rohs 2002/95/ec e 3 pb part # description CPC2017N 8-pin soic (50/tube) CPC2017Ntr 8-pin soic (2000/reel) parameter rating units blocking voltage 60 v p load current 120 ma max on-resistance 16 led current to operate 1 ma applications features description ordering information pin configuration ? security ? passive infrared detectors (pir) ? data signalling ? sensor circuitry ? instrumentation ? multiplexers ? data acquisition ? electronic switching ? i/o subsystems ? medical equipment?patient/equipment isolation ? aerospace ? industrial controls ? designed for use in security systems complying with en50130-4 ? small 8-pin soic package ? ttl/cmos compatible input ? arc-free with no snubbing circuits ? 1500v rms input/output isolation ? no emi/rfi generation ? immune to radiated em fields ? smd pick & place, wave solderable ? tape & reel version available the CPC2017N is a miniature device with two independent 1-form-a solid state relays in an 8-pin soic package that employs optically coupled mosfet technology to provide 1500v rms of input/output isolation. the super efficient mosfet switches and photovoltaic die use clare?s patented optomos architecture. the optically coupled outputs are controlled by highly efficient gaalas infrared leds. the CPC2017N uses clare?s state of the art, double-molded, vertical construction packaging to produce one of the world?s smallest relays. the CPC2017N offers substantial board space savings over the competitor?s larger 8-pin soic relay. switching characteristics of normally open (form a) devices control i load 10% 90% t on + + t off approvals ? ul recognized component: pending ? en/iec 60950-1: pending ? csa certified component: pending + control C control load load 1 2 3 4 7 8 5 6 + control C control load load
www.clare.com 2 CPC2017N r01 absolute maximum ratings are stress ratings. stresses in excess of these ratings can cause permanent damage to the device. functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. absolute maximum ratings (@ 25?c) parameter ratings units blocking voltage 60 v p reverse input voltage 5 v input control current peak (10ms) 50 ma 1a total power dissipation 1 600 mw isolation voltage, input to output 1500 v rms operational temperature -40 to +85 c storage temperature -40 to +125 c 1 derate linearly 5.0 mw / oc parameter conditions symbol min typ max units output characteristics @ 25c load current continuous 1 i f =1ma i l - - 120 ma peak t =10ms i lpk - - 350 ma p on-resistance 2 i l =120ma r on - 7.1 16 off-state leakage current v l =60v p i leak --1a switching speeds turn-on i f =5ma, v l =10v t on - 1.25 3 ms turn-off t off - 0.45 3 output capacitance 50v; f=1mhz c out -25 -pf capacitance input to output - - -1 -pf input characteristics @ 25c input control current 3 i l =120ma i f - 0.40 1 ma input dropout current - i f 0.1 0.35 - ma input voltage drop i f =5ma v f 0.9 1.2 1.4 v reverse input current v r =5v i r - - 10 a 1 load current derates linearly from 120ma @ 25 o c to 60ma @80 o c, and must be derated for both poles operating simultaneously. 2 measurement taken within 1 second of on time. 3 for applications requiring high temperature operation (greater than 60 o c) an led drive current of 3ma is recommended. electrical characteristics
CPC2017N www.clare.com 3 r01 performance data* *the performance data shown in the graphs above is typical of device performance. for guaranteed parameters not indicated in t he written speci? cations, please contact our application department. 35 30 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 led forward voltage drop (v) device count (n) typical led forward voltage drop (n=50, i f =5ma, t a =25oc) 35 30 25 20 15 10 5 0 on-resistance ( ) device count (n) 6.8 6.9 7.1 7.0 7.4 7.2 7.3 typical on-resistance distribution (n=50, i f =1ma, i l =120ma, t a =25oc) 0.35 0.45 0.55 0.30 0.40 0.50 0.60 led current (ma) device count (n) 25 20 15 10 5 0 typical i f for switch operation (n=50, i l =120ma, t a =25oc) 25 20 15 10 5 0 0.35 0.45 0.55 0.30 0.40 0.50 0.60 led current (ma) device count (n) typical i f for switch dropout (n=50, i l =120ma, t a =25oc) 1.0 1.2 1.4 1.6 1.1 1.3 1.5 turn-on (ms) device count (n) 25 20 15 10 5 0 typical turn-on time (n=50, i f =5ma, i l =120ma, t a =25oc) 0.26 0.30 0.34 0.38 0.36 0.32 0.28 turn-off (ms) device count (n) 25 20 15 10 5 0 typical turn-off time (n=50, i f =5ma, i l =120ma, t a =25oc) 35 30 25 20 15 10 5 0 80 84 88 92 82 86 90 blocking voltage (v p ) device count (n) typical blocking voltage distribution (n=50, t a =25oc) temperature (oc) -40 -20 0 20 40 60 80 100 load current (ma) 60 70 80 90 100 110 120 130 typical load current vs. temperature (i f =2ma) leakage ( a) -40 0.016 0.014 0.012 0.010 0.008 0.006 0.004 0.002 0 -20 0 20 40 60 80 100 typical leakage vs. temperature (measured across pins 3 & 4) (v l =60v) temperature (oc) blocking voltage (v p ) -40 91 89 87 85 83 81 79 77 -20 0 20 40 60 80 100 typical blocking voltage vs. temperature temperature (oc) temperature (oc) -40 -20 0 20 40 60 80 100 turn-on (ms) 1.0 1.5 2.0 2.5 3.0 3.5 typical turn-on vs. temperature (i l =50ma) i f =2ma i f =5ma turn-off (ms) -40 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -20 0 20 40 60 80 100 typical turn-off vs. temperature (i l =50ma) temperature (oc) i f =5ma i f =2ma
www.clare.com 4 CPC2017N r01 performance data* *the performance data shown in the graphs above is typical of device performance. for guaranteed parameters not indicated in t he written speci? cations, please contact our application department. temperature (oc) -40 -20 0 20 40 60 80 100 led forward voltage drop (v) 1.0 1.1 1.2 1.3 1.4 1.5 1.6 typical led forward voltage drop vs. temperature i f =1ma i f =2ma i f =5ma i f =10ma i f =20ma i f =50ma led forward current (ma) turn-on (ms) 0 5 1015202530354045 3.0 2.7 2.4 2.1 1.8 1.5 1.2 0.9 0.6 0.3 0 50 typical turn-on vs. led forward current (i l =120ma) led forward current (ma) turn-off (ms) 0 5 1015202530354045 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 50 typical turn-off vs. led forward current (i l =120ma) -40 14 12 10 8 6 4 -20 0 20 40 60 80 100 2 steady state instantaneous i f =5ma i f =5ma i f =2ma temperature (oc) on-resistance ( ) typical on-resistance vs. temperature (i l =60ma) typical i f for switch operation vs. temperature (i l =60ma) led current (ma) -40 3.0 2.5 2.0 1.5 1.0 0.5 0 -20 0 20 40 60 80 100 temperature (oc) load voltage (v) load current (ma) 150 100 50 0 -50 -100 -150 -1.5 -1.0 -0.5 0 0.5 1.0 1.5 typical load current vs. load voltage (i f =1ma, t a =25oc) time 10 s 100 s 1ms 10ms 100ms 1s 10s 100s load current (a) 0.0 0.2 0.4 0.6 0.8 1.0 energy rating curve
clare, inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publica tion and reserves the right to make changes to specifications and product descriptions at any time without notice. neither circuit patent licenses nor indemnity are expressed or implied. except as set forth in clare?s standard terms and conditions of sale, clare, inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products incl uding, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. the products described in this document are not designed, intended, authorized or warranted for use as components in systems in tended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of clare?s product may result in direct physical harm, i njury, or death to a person or severe property or environmental damage. clare, inc. reserves the right to discontinue or make changes to its products at any time without notice. specification: ds-CPC2017N-r01 ?copyright 2009, clare, inc. optomos? is a registered trademark of clare, inc. all rights reserved. printed in usa. 9/10/09 for additional information please visit our website at: www.clare.com 5 CPC2017N mechanical dimensions rohs 2002/95/ec e 3 pb manufacturing information moisture sensitivity clare has characterized the moisture reflow sensitivity of this package, and has determined that this component must be handled in accordance with ipc/jedec standard j-std-033 moisture sensitivity level (msl), level 3 classification. soldering reflow profile for proper assembly, the component must be processed in accordance with the current revision of ipc/jedec standard j-std-020. failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. washing clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. 8-lead soic narrow package recommended pcb land pattern dimensions mm (inches) 2.184 max (0.086 max ) 0.838 0.102 (0.033 0.004) 0.381 0.051 (0.015 0.002) lead to package standoff min 0.0254 (0.001) (max 0.102 (0.004) 0.432 0.127 (0.017 0.005) 0.203 0.025 (0.008 0.001) 1.016 0.025 (0.040 0.001) 5.60 (0.22) 1.30 (0.051) 0.55 (0.022) 2.54 (0.100) 9.347 0.203 (0.368 0.008) 6.096 0.102 (0.240 0.004) 3.810 0.051 (0.150 0.002) 2.540 typ (0.100 typ ) pin 1 k 0 =2.7 (0.106) k 1 =2.3 (0.091) 6.8 (0.268) 2.0 (0.079) b 0 =10.3 (0.406) a 0 =6.5 (0.256) 2.0 (0.079) 3.0 (0.118) r0.5 (0.020) 12.0 (0.472) 4.0 (0.157) 1.50 (0.059) 16.0 (0.63) 7.5 (0.295) embossment embossed carrier top cover tape thickness 0.102 max. (0.004 max.) 330.2 dia. (13.00 dia.)
|
